When the air conditioner is running in refrigeration, the water in the air will condense into water droplets on the evaporator fins (condensation phenomenon), and more water droplets will flow into the sink and be discharged to the outside through the water pipe. If the humidity in the air is not large, the condensation water is very little, and it is not enough to flow into the sink to evaporate, so the refrigeration effect is good, the drainage pipe of the inner machine is not outlet water is normal.

1、The mode is wrong, and the setting of temperature and wind speed is unreasonable. Treatment method: Adjust to the corresponding mode and set the appropriate temperature/wind speed.

2、The air filter is blocked or the air inlet of the inner unit is blocked. The opening Angle of the upper and lower air guide panels is set too small. Treatment method: clean the filter, remove obstacles, and adjust the Angle of ventilation.

3、The insulation effect of the room is poor (doors and Windows, exhaust fans are not closed). Treatment method: Close doors and Windows, exhaust fans, etc.

4、Poor heating effect: electric auxiliary heating is not turned on. Treatment method: Turn on the electric auxiliary heating.

5、The air conditioning does not match the size of the room. The air conditioning is small, the room area is large, the room is too high (hot air is in the upper part when heating), etc.

If there is no problem after the above inspection, professional network technicians will be arranged to serve you.

If the cooling effect is normal, it is caused by the high humidity of the room (the air conditioner of the internal outlet and the hot and humid air in the room are formed, which is normal), and the high wind gear can be opened to eliminate it.
If the refrigeration effect is poor, and there is white fog, there is no problem after inspection, we will arrange professional network technicians to serve you.

There is a cold heat exchange between the air conditioning environment and the outside world, at the beginning of refrigeration, because the indoor and outdoor temperature difference is not large, the room temperature can drop rapidly, but when it falls to a certain temperature, the cold amount generated by the air conditioning is exactly equal to the energy loss of the room and the outside world, the temperature of the room will not fall again, at this time the cold amount generated by the air conditioning refrigeration is only satisfied with maintaining the energy loss of the room. If you need to improve the cooling effect, it is best to improve the sealing performance of the room to avoid excessive indoor and external energy loss.

If the air conditioner indoor unit filter is not cleaned in time, when the mesh is blocked, there will be poor ventilation, small air volume, and slow cooling speed. It is recommended to clean the filter once every 2-3 weeks.